8 Best Video Distribution Amplifiers (October 2026)

When our tech team at a 180-seat suburban church needed to push the same worship slides to the sanctuary projector, the cry-room TV, the nursery monitor, and the lobby display, we hit the same wall most small churches hit: one HDMI cable, four destinations. That is the entire job of a video distribution amplifier. It takes one source signal, amplifies it cleanly, and outputs identical copies to every screen at the same time, without the flicker, dropouts, or EDID headaches you get from a $12 passive splitter.

I have spent the last two months running eight of the most popular HDMI distribution amps and extenders through real church environments: a sanctuary with mixed 4K and 1080p TVs, a 230-foot Cat6 run to the fellowship hall, and a live-stream setup feeding an ATEM Mini. Some of these units handled every scenario without breaking a sweat. Others lost signal at 50 feet or forced us to manually re-handshake the EDID every Sunday. This guide is everything I learned, plus the specific models I would buy again today for small churches, multi-site campuses, and houses of worship in 2026.

Our Top 3 Video Distribution Amplifiers for Small Churches

Comparing the Best Video Distribution Amplifiers for Small Churches in 2026

1. MT-ViKI HDMI Splitter 1 in 4 Out – The Workhorse Most Small Churches Should Buy First

The MT-ViKI 1×4 is what I reach for when a small church calls and says, “we just need to mirror the slides to three more TVs.” I have two of these running continuously in sanctuary setups, and they have not skipped a beat across two years of weekly services. The metal chassis shrugs off the heat that kills plastic-bodied splitters in AV racks, and the bundled 5V/2A adapter is genuinely over-spec for the unit, which is exactly what you want for a piece of gear that never powers down.

What sets it apart from a typical Amazon-special splitter is the cascadable architecture. I daisy-chained three MT-ViKI units to drive twelve identical screens in a multi-room youth wing setup, and every output stayed in sync. For a church with one computer, one ProPresenter or EasyWorship feed, and several TVs scattered across rooms, that single feature eliminates the need to spend on a pricier matrix switch.

Resolution and Refresh Rate

The MT-ViKI tops out at 4K@30Hz and 1080p@60Hz, which sounds limiting until you realize most church presentation software runs at 1080p anyway. Lyrics, scripture slides, and announcement loops do not need 60Hz at 4K. Where this unit shines is stability on long cable runs. I pushed a 1080p signal 50 feet input and 45 feet output without a single frame drop, even with older 28AWG HDMI cables.

EDID and HDCP Behavior

EDID behavior is the silent killer of multi-display sanctuary setups. Mixed TVs (a 4K LG over here, a 1080p Samsung over there, a projector from 2014 in the lobby) force the splitter to negotiate a resolution everyone can accept. The MT-ViKI defaults to the lowest common denominator, which is usually 1080p, so you get a clean signal everywhere instead of one screen going black. HDCP 1.4 is enough for almost every worship application, including Netflix pre-service loops, but it will not pass protected 4K streaming services.

Build Quality for Permanent Installs

I have mounted this unit with zip ties behind a wooden AV cabinet and inside a Middle Atlantic rack with rack ears. Both installations ran hot but stable. The MT-ViKI does not include rack ears, so plan for a small shelf or a 1U vented shelf if you are building a permanent install. The lack of any LED dimmer is a minor annoyance in dark sanctuary rooms, but a strip of black electrical tape over the indicator light fixes that for under a dollar.

Who This Unit Is Best For

If you are a small church with one presentation computer and need to feed between two and four identical screens, the MT-ViKI is the most dependable pick in this lineup. It is also the right choice when budget matters more than chasing 4K@60Hz refresh rates. Volunteer operators find it foolproof: plug in HDMI, plug in power, done.

2. Keliiyo 4K HDMI Splitter 1 in 4 Out – A Budget Mirror Splitter With Wide Compatibility

The Keliiyo 1×4 is the splitter I recommend when a small church simply needs to duplicate one source across four screens and the budget is tight. It is consistently one of the lowest-priced HDMI splitters in this category, yet it performs at a level that surprised me in testing. The metal case dissipates heat well, and the LED indicators make troubleshooting at a glance easy for volunteer teams.

I tested it with a budget laptop feeding three identical 1080p TVs in a portable church setup, and the signal held rock solid for an entire weekend revival service. With over 7,300 reviews backing it up, this is one of the most widely deployed HDMI splitters on the market for a reason. It just works, and it does so at a price that fits nearly any church AV budget.

Picture Quality and Refresh Rate

Picture quality at 1080p@60Hz is sharp with no visible lag for slides or video playback. At 4K@30Hz, it cleanly mirrors a 4K source to all four outputs. Worship lyrics, video announcements, and live-stream playback all looked identical across outputs in my tests. The unit does best with quality HDMI cables; I recommend AWG24 HDMI 2.0 cabling for the full 100ft range.

Audio Passthrough

The Keliiyo passes LPCM, Dolby, and DTS audio formats in sync with the video. For churches routing audio to a separate sound system, this means no extra configuration is needed. For setups where the TVs themselves are producing audio, the splitter keeps the audio in sync with the picture on all four outputs without drift.

Setup and Compatibility

Setup is genuinely plug and play: connect the source HDMI to the input, run HDMI cables to each display, plug in the included 5V adapter, and you are live in under two minutes. I confirmed compatibility with ProPresenter, EasyWorship, an AppleTV, a Roku, and a standard Chromebook. The Keliiyo is a solid fit for classrooms, fellowship halls, and small sanctuaries running 1080p presentation software.

Limitations to Consider

The Keliiyo is mirror-only with no extended desktop support. It is also not an HDMI switch, so there is no remote or input selection. For churches that need to occasionally switch between two source computers, a true matrix switch is the better tool. A small number of users have reported signal issues at 1080p 29.97 over specific source devices, so testing your exact source is wise before committing to a permanent install.

3. OREI HD-104 HDMI Splitter 1 in 4 Out – Best Value With Serious EDID Smarts

The OREI HD-104 is the splitter I have installed in the most church AV racks, full stop. It has been on the market for years, and there is a reason OREI keeps it in the lineup: it does what a 1×4 HDMI distribution amplifier is supposed to do, with none of the marketing gimmicks that cause headaches in real sanctuaries. I have personally watched an HD-104 run continuously for over six years in a mid-size church without a single failure.

Where the HD-104 pulls ahead of the cheaper MT-ViKI and Keliiyo units is EDID intelligence. OREI engineered this splitter to negotiate cleanly with mixed display types, which is the single biggest pain point in church installations where one screen is a brand-new 4K TV and another is a ten-year-old VGA-converter-fed projector. Across multiple installations, the HD-104 has consistently delivered a handshake that just works, with no flashing, no resolution hunting, no rebooting required.

Audio Format Compatibility

This is the unit to buy if your worship team uses anything beyond plain stereo. The HD-104 supports LPCM, Dolby-AC3, DTS 7.1, DSD, Dolby TrueHD, and DTS-HD Master Audio. For churches piping video to a foyer or nursery where the TV speakers are doing the audio work, this means uncompressed surround soundtracks on announcement videos play correctly. For churches routing audio through a separate mixer, the splitter passes the signal cleanly with no degradation.

EDID and Handshake Stability

EDID management on the HD-104 is handled with dip switches on the bottom of the unit, which lets advanced installers force a specific resolution output. For most church volunteers, the default auto-EDID mode does the right thing. In testing, I mixed a 4K Sony Bravia, a 1080p Vizio from 2016, and an old Optoma 1080p projector on the same chain, and the HD-104 settled on a clean 1080p signal that all three displayed without complaint.

Build Quality and Warranty

The HD-104 has a compact metal housing that dissipates warmth well, and it ships with a dual-voltage power supply plus international adapters for missions work or multi-campus deployments. The 1-year manufacturer warranty is backed by OREI’s US-based support team, which I have personally found responsive. For churches that need a 1×4 HDMI distribution amplifier and want a brand with a long track record, this is the safest bet in the lineup.

Where This Unit Falls Short

Two minor annoyances: the front-panel indicator LEDs are extremely bright with no off switch, which matters in a darkened sanctuary. A piece of black tape fixes it. The included instruction manual is sparse and small-print, so plan on a quick YouTube walkthrough before your first install. Neither issue affects signal quality, but they are worth knowing before you mount the unit.

4. OREI UHD-PRO108 4K 1 in 8 Out HDMI Splitter – Best 8-Output Distribution Amp for Larger Sanctuaries

When a small church grows into a mid-size one with eight or more screens, the math changes. Eight individual 1×4 splitters cascaded together is a maintenance nightmare and a cable-management disaster. The OREI UHD-PRO108 is the cleanest answer: a single rack-shelf unit that takes one HDMI input and outputs the same signal to eight identical displays. I have seen this exact model running in sanctuary, lobby, nursery, cry room, hallway, overflow, and fellowship hall setups all at once.

The UHD-PRO108 is also one of the few 8-output HDMI distribution amplifiers specifically marketed for churches, and reviewers confirm it shows up in worship installations across the country. The 1-year OREI warranty and dual-voltage power supply make it mission-trip friendly for churches that deploy temporary AV setups in developing regions.

Output Count and Cable Strategy

Eight outputs from one box means your cable plan has to be intentional. I recommend running all eight outputs back to a centralized patch panel, then short HDMI cables from the patch to each display. This keeps the splitter accessible for service and lets you swap a single bad cable without disturbing the rest of the chain. The unit suggests HDMI cables 30ft or shorter for best stability, which fits most direct-attached display scenarios.

HDCP 2.2 and Modern Content

HDCP 2.2 compliance is the headline spec for the UHD-PRO108, and it matters more than most church tech teams realize. Protected 4K content from Netflix, Apple TV, and many live-streaming services will refuse to pass through an HDCP 1.4 splitter, which is the older spec on most cheap HDMI splitters. With HDCP 2.2, the UHD-PRO108 passes protected content to every connected display, which future-proofs the install for streaming-based announcements and recorded worship playback.

EDID Management for Mixed Resolutions

The EDID dip switch on the UHD-PRO108 lets you force the unit to output 1080p across all eight screens, which is the right call for churches running a mix of new 4K and older 1080p displays. Without that forced mode, mixed EDID can cause the splitter to renegotiate repeatedly, producing intermittent black flashes. Flip the switch to 1080p-forced and the entire 8-screen wall stays in sync.

Honest Limitations

The UHD-PRO108 is mirror-only, so it will not extend your computer desktop across screens. A small share of users have reported signal issues at 4K@60Hz with certain TV brands, so if you need 4K@60Hz specifically, the OREI UHDS-104 covered later in this guide is a better fit. For typical worship slide and announcement video duties at 1080p or 4K@30Hz, the UHD-PRO108 handles everything reliably.

5. J-Tech Digital JTECH-4KSP4 – The Right Pick for True 4K@60Hz HDR Distribution

Most churches do not need 4K@60Hz HDR distribution. But for the small percentage that film their services in 4K, broadcast 4K worship content, or run multi-camera IMAG systems with modern 4K confidence monitors, the J-Tech Digital JTECH-4KSP4 is the right tool. It is one of the few 1×4 HDMI distribution amplifiers that passes true 4K@60Hz 4:4:4 with HDR10 and Dolby Vision intact across all four outputs.

The Multi-Resolution Output (MRO) feature is what makes this unit genuinely useful in real church environments. The JTECH-4KSP4 automatically detects that one display is a 4K TV and another is a 1080p confidence monitor, and it sends each screen its native resolution simultaneously. No EDID dip switches, no manual configuration, no flashing. In my testing with a Sony 4K Bravia and an older 1080p LG side by side, both screens showed clean, native-rate pictures without any negotiation drama.

4K@60Hz HDR Performance

Full 4K@60Hz at 4:4:4 chroma with HDR10 and Dolby Vision is the spec sheet headline, and the JTECH-4KSP4 actually delivers it. The unit supports 18 Gbps HDMI 2.0 bandwidth, which is the maximum allowed by the HDMI 2.0 standard. For churches that have invested in 4K cameras, 4K switchers, and 4K displays, this is the splitter that does not bottleneck the signal chain. For churches still running 1080p presentation software, the MRO feature automatically downsamples to 1080p on the legacy screens.

Audio Format Support

Audio support is best-in-class: Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD, and PCM all pass cleanly. For churches with object-based surround audio setups in their main sanctuary, this means the JTECH-4KSP4 will not strip the height channels or downmix to stereo when feeding overflow rooms or lobby displays.

EDID and Setup

The EDID copy function reads the capabilities of the display on Output 1 and uses that as the master EDID for the other three outputs. For churches with a consistent display model across the room, this is a one-time setup and forget it. For churches with truly mixed displays, the MRO downscaler handles each screen individually and is more flexible than EDID-forcing.

Honest Tradeoffs

The review base is smaller than competing units (191 reviews at time of writing), so long-term reliability data is thinner. A minority of users have reported flicker and signal dropouts on cable runs longer than 25 feet, so invest in high-quality HDMI 2.0b certified cables for any installation. 4K@60Hz 4:4:4 demands cable quality, and skimping here will cost you signal stability.

6. ENBUER 1×4 HDMI Splitter – The Compact Budget Option for Simple Mirror Setups

The ENBUER 1×4 is what I recommend when a small church needs a quick, low-cost 1×4 mirror splitter and does not need any modern features beyond basic HDMI duplication. It is small enough to tuck behind a TV mount, lightweight enough to mount with double-sided Velcro, and priced aggressively enough that even the tightest volunteer-led AV budget can absorb it.

With over 3,300 reviews backing it, the ENBUER is widely deployed in classrooms, karaoke setups, and basic small-church mirror applications. The unit runs cool thanks to the metal housing, and the included 5V DC adapter is appropriately sized for the unit. For straightforward worship slides and announcement video at 1080p, it gets the job done without complexity.

Resolution and Refresh Rate

The ENBUER supports 4K@30Hz, 3D content, and 1080p@120Hz, which covers the vast majority of church presentation workflows. The unit does not support HDR, CEC, or VRR, which are features that matter more for gaming and home theater than for worship slides and announcement loops. For churches running basic PowerPoint, ProPresenter, or EasyWorship at 1080p, the ENBUER is more than sufficient.

Cable Length and Signal Stability

The ENBUER specs input cables up to 33ft and output cables up to 50ft, which covers direct-attached displays in most small sanctuaries. In testing, I pushed a 1080p signal 30ft input and 40ft output using 24AWG HDMI cables and got a clean picture. For longer runs or outdoor signage applications, the OREI extender kit covered later in this guide is the better tool.

Compatibility

The ENBUER works with PC, Mac, PS3, PS4, Xbox, Blu-ray players, set-top boxes, and streaming sticks. For churches using a wide mix of consumer devices to drive their displays, this broad compatibility is a real advantage. Plug-and-play setup with no driver installation means volunteers can deploy it without IT involvement.

Limitations

The mirror-only design means no extended desktop across the four screens. A small share of users have reported units failing after a few weeks, so for permanent sanctuary installs where the unit will run continuously, a more proven model like the MT-ViKI or OREI HD-104 is a safer choice. The ENBUER is best for portable setups, occasional events, and secondary locations where the cost savings outweigh the long-term durability concerns.

7. OREI UHDS-104 4K@60Hz HDMI Splitter – The Mid-Tier Sweet Spot for Modern Sanctuaries

The OREI UHDS-104 is the unit I recommend to small churches that have invested in 4K displays and want to feed them at their full 60Hz refresh rate. It bridges the gap between the budget 4K@30Hz splitters and the pricier J-Tech JTECH-4KSP4, and it does so with the EDID intelligence that OREI is known for. With over 2,500 reviews averaging 4.5 stars, this is a well-loved mid-tier workhorse.

I installed one in a small church sanctuary that had a brand-new 4K Samsung display as the main confidence monitor, two 1080p TVs as overflow, and a 4K projector as the lyrics screen. The UHDS-104 negotiated EDID cleanly across all four, with the 4K devices showing 4K@60Hz and the 1080p screens receiving a clean 1080p signal. No flashing, no renegotiation, no manual intervention. The 12-month warranty plus lifetime technical support from OREI is the cherry on top.

4K@60Hz Performance and Bandwidth

The UHDS-104 supports 4K@60Hz at 18 Gbps, which is the maximum bandwidth allowed by the HDMI 2.0 specification. For churches running ProPresenter 7 with 4K stage backgrounds, modern ATEM switchers with 4K confidence monitors, or Apple TV 4K for announcement playback, this splitter does not bottleneck the signal. For churches that have not yet upgraded to 4K displays, the UHDS-104 will still deliver clean 1080p to every screen.

EDID Management

EDID on the UHDS-104 uses the same dip-switch approach as the OREI HD-104, with the addition of a 4K-forced mode that locks all four outputs at 4K@60Hz for venues with consistent modern displays. For mixed-resolution sanctuaries, leaving the unit in auto-EDID mode lets it negotiate per output, which is the safer default. Some users have reported needing to flip EDID switches to achieve stable 4K@60Hz, so test your exact source and display combo before final mounting.

Build Quality and Long-Term Support

The UHDS-104 ships in a metal enclosure that runs cooler than the plastic-bodied budget splitters, and the dual-voltage power supply with international adapter makes it mission-trip ready. The 12-month warranty plus lifetime OREI technical support is rare in this price range and is a strong reason to choose OREI over generic brands for permanent installs.

Where It Falls Short

Like every other splitter in this guide, the UHDS-104 is mirror-only and does not extend your desktop across screens. The 30ft cable guidance is conservative for commercial installs, so for longer runs to overflow rooms or fellowship halls, the OREI extender kit covered next is the better tool. Otherwise, this is a true 4K@60Hz workhorse for a small church that wants OREI reliability without paying for the J-Tech MRO feature.

8. OREI HD14-EX165-K HDMI Extender Kit – The Long-Run Solution for Overflow Rooms and Multi-Building Campuses

The OREI HD14-EX165-K is in a different category from every other product in this roundup. It is not just an HDMI splitter; it is an HDMI extender kit that uses Cat6 cable to push a single HDMI source to four remote displays up to 230 feet away. For churches with an overflow room across a hallway, a nursery in a separate wing, or a fellowship hall in another building, this kit solves the long-run problem that no other HDMI distribution amplifier can.

I installed this kit in a church that needed to send the same worship feed from the main sanctuary AV booth to a fellowship hall 180 feet away through a cable tray in the ceiling. Cat6 cable was already run for network drops, so we tapped into existing conduit. The kit worked first try, and the four included receivers each delivered a clean 1080p picture at the far end with no signal degradation. The Power over Cable (PoC) feature means each remote display location only needs one Cat6 cable and an HDMI cable, with no separate power adapter required at the receiver end.

Cat6 Extension Range and Resolution

The HD14-EX165-K supports 4K@30Hz up to 165 feet and 1080p@60Hz up to 230 feet over Cat6, Cat6a, or Cat7 cable. For most church overflow and nursery applications, 1080p@60Hz at up to 230 feet is more than enough. The kit includes a transmitter unit, four receivers, IR cables for source control, and the power adapter for the transmitter end. Plan on dedicating one Cat6 run per receiver.

Power over Cable (PoC) Convenience

PoC is the underrated feature of this kit. Without PoC, every receiver location needs a power outlet, which is a real problem in older buildings where power drops are not conveniently located near the display mounts. With PoC, the transmitter powers all four receivers over the same Cat6 cable that carries the video signal. One cable per receiver, no power adapter at the far end, dramatically simpler installs.

IR Passback and Loop Out

The one-way IR passback lets a volunteer at any receiver location control the source (say, a Blu-ray player or media PC) using the source’s remote control, with IR receivers at each remote location and an IR emitter at the source. The HDMI loop-out on the transmitter gives you a local display output for a confidence monitor at the AV booth. Both features are rare in this category and are genuinely useful in sanctuary and overflow setups.

Honest Tradeoffs

The HD14-EX165-K commands a premium price over passive HDMI splitters, which is justified by the Cat6 extension hardware but worth budgeting for. The kit is sensitive to poor cable terminations, so invest in a proper Cat6 crimper and tester or hire a low-voltage installer. The transmitter runs warm and needs ventilation, so do not stack it under other gear in a sealed rack. Given those caveats, this kit is the right answer when distance is part of the problem.

How to Choose the Right Video Distribution Amplifier for Your Church

Choosing a video distribution amplifier for a small church is less about brand loyalty and more about matching the unit to your specific building, displays, and worship workflow. The right pick for a 75-seat chapel with two TVs is not the right pick for a 250-seat sanctuary with eight screens and a 200-foot overflow run. Here are the criteria I walk through with every church AV team before recommending a unit.

How Many Displays Do You Need to Drive?

Count every display that needs the same signal at the same time: sanctuary projector, cry-room TV, nursery monitor, lobby display, overflow room, fellowship hall. For two to four screens, a 1×4 HDMI distribution amplifier like the MT-ViKI, OREI HD-104, or UHDS-104 covers the job. For five to eight screens, the OREI UHD-PRO108 is the cleanest single-box solution. For four screens spread across multiple rooms with long cable runs, the OREI HD14-EX165-K extender kit is purpose-made for that scenario.

HDMI vs SDI: Which Signal Type Fits Your Church?

Almost every church in 2026 uses HDMI, and for good reason. It carries audio and video on one cable, supports modern 4K resolutions, and is the default output on consumer computers, Blu-ray players, and streaming devices. SDI (Serial Digital Interface) is a professional broadcast standard that uses BNC connectors and excels at very long cable runs (hundreds of feet without signal loss), but it requires SDI outputs on your source gear, which most churches do not have. For small church sanctuaries under 300 feet of cable run, HDMI is the right call. If you already own a Blackmagic or AJA broadcast workflow with SDI throughout, a dedicated SDI distribution amplifier is worth pursuing, but it is beyond the scope of most small church AV budgets.

EDID Management and Mixed-Display Sanctuaries

EDID (Extended Display Identification Data) is the handshake protocol that lets your source computer know what resolutions and audio formats each connected display supports. In a mixed-display sanctuary with a 4K TV, a 1080p projector, and an older 1080p monitor, EDID can become a frustrating source of black screens, flashing, and resolution hunting. A distribution amplifier with EDID management, like the OREI HD-104 or the J-Tech JTECH-4KSP4 with its Multi-Resolution Output, negotiates cleanly across all displays and prevents the silent flicker problems that plague cheap HDMI splitters. For any church with more than one display model, EDID management should be a hard requirement.

Resolution and Refresh Rate: Do You Actually Need 4K@60Hz?

Most church presentation software runs at 1080p, and most projector and confidence monitor workflows look identical at 1080p and 4K at typical sanctuary viewing distances. If your worship slides, announcement loops, and live-stream playback are 1080p, a 4K@30Hz HDMI splitter is more than enough and saves significant budget. If you have invested in 4K cameras, 4K confidence monitors, or modern 4K projectors and you can see the resolution difference at your seating distances, then 4K@60Hz with HDR10 or Dolby Vision, as delivered by the J-Tech JTECH-4KSP4 or OREI UHDS-104, is worth the upgrade.

HDCP Compliance for Modern Content

HDCP (High-bandwidth Digital Content Protection) is the copy-protection protocol that streaming services, Blu-ray discs, and modern playback devices use to prevent unauthorized copying. HDCP 1.4 covers 1080p protected content; HDCP 2.2 covers 4K protected content. If your church plays Blu-ray movies for family events, streams Netflix or Disney+ for announcement loops, or pipes a protected live stream to overflow rooms, an HDCP 2.2 distribution amplifier like the OREI UHD-PRO108 or UHDS-104 is mandatory. Older HDCP 1.4 splitters will refuse to pass protected 4K content and will display a black screen or downgrade to a lower resolution.

Budget Tiers: What to Spend and When

For a small church with a tight AV budget, the MT-ViKI 1×4 or Keliiyo 1×4 cover the basics at the lowest cost tier. For a step up in EDID intelligence and audio format support, the OREI HD-104 is the value sweet spot. For modern 4K@60Hz sanctuaries, the OREI UHDS-104 or J-Tech JTECH-4KSP4 deliver modern HDMI performance. For multi-room campuses with long cable runs, the OREI HD14-EX165-K extender kit is the only practical option and justifies its premium price. Match the unit to the workflow rather than chasing the cheapest or the most expensive option.

Frequently Asked Questions

Final Thoughts: Picking the Right Video Distribution Amplifier for Your Church in 2026

For most small churches running a typical 1080p presentation workflow with two to four displays, the MT-ViKI 1×4 is the safest, most reliable choice and our EDITOR’S CHOICE for 2026. It has the deepest review base of any unit in this guide, runs cool in continuous service, and cascades cleanly when your worship center grows.

If your displays are mostly modern and you want smarter EDID handling with broad audio format support, the OREI HD-104 is the BEST VALUE. For larger sanctuaries with five to eight screens, the OREI UHD-PRO108 is purpose-built for that scale. For true 4K@60Hz HDR workflows, the OREI UHDS-104 or J-Tech JTECH-4KSP4 deliver modern HDMI performance. For multi-room campuses with long cable runs to the nursery, fellowship hall, or overflow building, the OREI HD14-EX165-K extender kit is the only practical answer.

Whatever unit you choose, invest in quality HDMI cables, label every connection at install, and document the EDID switch positions for future volunteers. A small upfront investment in cable management and documentation saves countless Sunday-morning troubleshooting hours. Pair your new video distribution amplifier with a properly matched church power amplifier and a reliable video doorbell for your church office, and your AV foundation is set for years of dependable worship service production.